home Contact Us 繁體中文
 
研磨、清洗自動化設備
雷射自動化設備
雷射自動化設備
移印 / 蓋印自動化設備
其他自動化設備
 
首頁產品介紹研磨、清洗自動化設備QFN自動溢膠研磨機  
 
 
QFN自動溢膠研磨機 < 10428 >
  Auto QFN Deflush Machine < 10428 >

     
 
   
進料區
Loading area
取料吸盤及測高 sensor
Vacuum chuck for material pick-and-place and height sensor
真空平台及研磨模組
Vacuum platform and grinding module
清洗區
Cleaning area
烘乾區
Drying area
收料區
Unloading area
相關影片 1
Related Film 1
相關影片 2
Related Film 2
規格列印Standard Print
QFN自動溢膠研磨機
設備特性
Equipment Characters
•無需添加任何化學藥劑,不傷人體及汙染環境.
No chemical, no harm to human body and the environment.
設備空間小,全機自動化.
Equipment dimension is small. Full automation
•移除效果可自行設定.
The effect of removing can be set up as your requirement
研磨移除量可精準控制.
The grinding level of removing can be controlled precisely
可得優質的產品表面.
Will get high quality product surfaces
一人可操作多機,減輕人力負擔
Multiple machineries can be controlled by one person to reduce the cost
設備功能
Equipment Function
適用於QFN產品之溢膠研磨,使用軟性研磨輪加水,將溢出導線架之膠體磨除.

It's applied to deflush QFN products. By using soft grinding wheels and water to remove the flush on lead frames.
生產流程
Production procedures
堆疊進料 → 移載台 → #1研磨輪研磨(可設定研磨次數) → #2研磨輪研磨 → 移載台清潔 → 中間移載機構 → 產品清洗 → 烘乾 → 對中機構 →堆疊收料

Stack loading → Pick-and-place → #1 Grinding wheel (Grinding frequency can be set up) → #2 Grinding wheel → platform cleaning → Pick-and-place device → Product cleaning → Drying → Centering device → Stack unloading
     
 
設備規格
Equipment Specifications
項 目
Item
單位
Unit
內 容
Content
膠體移除率
Compound removing rate
μm 15 ± 3
Stand off mil <1.5
冷卻水供給量
Cooling water supply
l/min 40
產品走向
The operation direction
- 由左至右,U turn
From the left to the right; U turn
進收料區方式
Loading and unloading
- Stack Magazine or Slot Magazine.
可程式控制器(PLC) - OMRON
機台外觀尺寸
Dimension
mm Appr.2660(L) * 1750(W) * 2100(H)
設備總重量(約)
Total net weight
Kg 1250
設備稼動率
Utilization
- a. Down Time Rate:<1%.
b. MTTA:<1min.
c. MTBF>168 Hrs.
d. UPH:>180 strips.
e. Change Over Time :<30min
耗材及選購品
Consumables and optional
- a. Change over kit
(產品外型尺寸不同須更換KIT)
b.研磨砂輪
c. 砂輪修整片

a. Change over kit
(The kit should be changed when the material sizes are different)
b. Grinding wheel
c. Grinding wheel dresser pad
廠務需求
Facility Requirements
Equipment Items Requirement  
Machine Model   Model 10428
Power Supply Voltage /Phase /Wire /Hz 220VAC /1∮/ 3W/ 50/60Hz
Capacity 75A
Ground, Ω Normal
Dry Air Supply Usage(NL/min) 500L/min. (Total)
Pressure >90PSI
(Over 5 kgf/cm2)
Size / Fitting ∮12mm
Temperature ℃ Normal
Pure Water
  Supply
Usage(L/min) 40 L/min.
Press kg/cm2 2~3kg/cm2
Temperature ℃ NORMAL
Size / Fitting 1/2" X 2 Fitting by Clamp
Air Exhaust Type Air
Static Pressure(mmAq) 35mmAq X 2
Usage(m3/min) 16~18 m3/min.
Size / Fitting Outer Diameter:100mm X 2/Fitting by Clamp
Water Exhaust Type Water
Static Pression(mmAq) FREE FLOW
Size / Fitting Outer Diameter:33.5mm X 2 / Fitting by Clamp
     
   
top
沛鑫科技有限公司 桃園市中壢區龍興路701巷8號  TEL:886-3-4366986 FAX:886-3-4664906
Copyright © 2007 Passion Technology Co., Ltd. Design by AboutNIC.