home Contact Us 繁體中文
 
研磨、清洗自動化設備
研磨成型自動化設備
雷射自動化設備
移印 / 蓋印自動化設備
其他自動化設備
 
首頁產品介紹其他自動化設備切削液循環過濾冷卻裝置  
 
 
切削液循環過濾冷卻裝置 < 9823 >
  Emulsion system< 9823 > 

     
 
   
雙過濾系統
Duo-filter system
控制面板
Control panel
規格列印  Standard Print
 
切削液循環過濾冷卻裝置
設備特性
Equipment
Characters
一對多供給:回收液處理量達90L/min,一部機器可同時供給多部機台使用,節省設施空間及設備成本。

One to multiple : The amount of recycled fluid reaches 90L/min. One device can support multiple machineries to reduce spaces and costs.
集中控制:配置迷你指示燈流程面板,方便操作及監控設備運轉。

Centralized control: Deployed mini LED process panel offers easy operation and monitoring.
自動補給:配備液位計自動補給R.O.,並搭配攪拌器及自動給藥泵浦,減少操作人力。

Auto supply: Equipped with liquid level meters to supply R.O. automatically. Collocated with a agitator and auto pump to reduce labors.
連續沉澱:連續沉澱槽體設計,延長濾袋更換頻率,減少稼動成本。

Consecutive precipitate: Design with a consecutive precipitate tank, to lengthen the replacement frequency of filter bags and reduce the cost.
自動回流:回收槽搭載泵浦及電動閥,依面板選擇模式自動排液或回流。

Auto reflux: With a pump and a motor valve, you can select auto exhausting and reflux by using the control panel.
恆溫制御:配備高效率熱交換器及PID溫控器,維持供給液溫度,確保加工品質。

Thermostat: By using a high efficiency heat exchanger and a PID temperature controller maintaining fluid temperature to make sure the machining quality.
備份供給:搭載備用循環泵浦及過濾器,免除故障及保養的停機時間,提高設備稼動率。

Backup supply: Avoid long time MTBF by a cycling pump and a filter to increase utilization.
設備功能
Equipment Function
提供切割機台冷卻液回收過濾及維持供給液溫度之循環系統,提高切割速度,減少稼動成本。

It's a recycling system for sawing machine to filter cutting fluid and maintain its temperature in order to increase the speed of cutting and also decrease the cost.
設備規格
Equipment Specifications
1. R.O.及Recycled liquid集中控制切換。
Switch R.O. and recycled liquid by central control.
2. 設備外觀(mm):
主體部分:2000(L)*1200(W)*2000(H)
收集槽:400(L)*300(W)*300(H)

Dimension (mm):
Main: 2000(L)*1200(W)*2000(H)
Tank: 400(L)*300(W)*300(H)
3. 桶槽材質:SUS304
The material of the tank: SUS304
廠務需求
Facility Requirements
1. 電壓 Voltage:
220V, 3∮,50~60HZ
2. R.O.純水:
口徑3/4”,壓力5kg/c㎡

R.O. pure water: Diameter 3/4"; pressure 5kg/ c㎡
3.冰水:
input :口徑3/4”,壓力2kg/c㎡
output:口徑3/4”

Cold water:
input: diameter 3/4"; pressure 2kg/ c㎡
output: diameter 3/4"
4.排水管:口徑2
Exhaust pipe: diameter 2"
     
top
沛鑫科技有限公司 桃園市中壢區龍興路701巷8號  TEL:886-3-4366986 FAX:886-3-4664906
Copyright © 2007 Passion Technology Co., Ltd. Design by AboutNIC.