home Contact Us 繁體中文
 
研磨、清洗自動化設備
研磨成型自動化設備
雷射自動化設備
移印 / 蓋印自動化設備
其他自動化設備
 
首頁產品介紹研磨成型自動化設備記憶卡類全自動斜邊倒角機  
 
 
記憶卡類全自動斜邊倒角機 < 9437 >
  MICRO SD card Automatic edge Chamfering < 9437 >
     
 
   
規格列印 Standard Print
 
記憶卡類全自動斜邊倒角機
設備特性
Equipment Characters
•自動進收料.
Fully auto loading and unloading.
•使用鑽石砂輪,壽命長.
Use diamond grinding wheels. Long service life.
•使用伺服傳動主軸.
High speed spindle.
•PIN 1 CCD檢測.
PIN 1 CCD inspection.
設備功能
Equipment Function
適用於COB製程MICRO SD/SD/MMC/M2/USB及其他記憶卡類,金手指斜邊倒角。

It's applied for MICRO SD card golden finger side chamferin.
設備流程
Production procedures
Loading → Orientation Chk.(CCD) → Precision → Chamfering → Cleanness → Dryer → Unloading
設備規格
Equipment Specifications
•進收料及定位區皆使用伺服定位,精度高.

Using servo motor for loading and unloading arms. High precision.
•大扭力伺服移動手臂.
High torque transfer arms.
•獨立真空吸盤,不掉料.
Independent vacuum generator for each stage.
•10”觸控螢幕操作.
10” touch panel.
CCD PIN 1 檢測
CCD PIN1 Inspection
•防止材料擺放錯誤.
Ensure the products orientation.
•可設定全部檢查或By pass.
Allow 100% inspection or by pass.
研磨主軸
Grinding spindle
•高速伺服傳動研磨主軸.
High speed spindle.
•主軸X-Y位置可調整.
The X-Y position of the spindle can be adjusted.
•四顆一次成型.
Four pieces are shaped at once grinding.
•產品上下吸盤吸著.
Materials are hold and fixed by vaccum sucking discs.
•研磨公差: ±0.05mm
Grinding tolerance: ±0.05mm
•UPH:1.6K
廠務需求
Facility Requirements

•電源需求:
1相,220V,50~60Hz,30A.

Power supply:
Single phase,220V,50~60Hz,30A.

•空氣源需求:4~7 kg/cm2
•耗氣量:800 L/min.

Air supply:4~7 kg/cm
Usage:800 L/min.
•進氣管:∮3/4”*1.
Air inlet:∮3/4”*1.
•排氣管路:∮100mm*1支
•排放量:23M3/min.

Exhaust pipe:∮100mm*1
Air exhaust: 23M3/min.
•進水管:∮1/2”.
Water inlet:∮1/2”
•廢水排放管路:∮33.5mm*1支.
Water exhaust:∮33.5mm*1
•研磨用水消耗量: 
自來水,10~15 L/min,2~3Kg/cm2 .

Grinding Water Exhaust:
City water,10~15 L/min,2~3Kg/cm2.
•設備外觀(mm):2200(L)*1135(W)*2100(H)
Dimension(mm):2200(L)*1135(W)*2100(H)
     
top
沛鑫科技有限公司 桃園市中壢區龍興路701巷8號  TEL:886-3-4366986 FAX:886-3-4664906
Copyright © 2007 Passion Technology Co., Ltd. Design by AboutNIC.