記憶卡類全自動研磨成型機
設備特性 •全自動進收料.
•使用鑽石砂輪,壽命長.
•使用高速研磨專用主軸.
•各組砂輪可獨立參數調整.
設備功能 適用於COB製程MICRO SD及其他記憶卡類外觀成型研磨,兩邊(倒角)及NOTCH成型。
設備流程 Tray Loading → Orientation Chk.(CCD) →Precision → Corner*2 (0.8R) → Notch + Corner (0.8R) → Cleanness → Dryer → Measure (CCD) → Unloading
設備規格 •進收料區皆使用伺服定位,精度高.
a.大扭力伺服移動手臂.
b.獨立真空吸盤,不掉料.
c.10”觸控螢幕操作.
  •CCD PIN 1檢測:
a.防止材料擺放錯誤.
b.可設定全部檢查或By pass.
  •研磨功能:
a.伺服雙研磨主軸.
b.主軸X-Y位置可調整.
c.倒R角及NOTCH成型,三顆一次成型電鑄砂輪.
d.產品上下吸盤吸著
e.氣壓缸驅動垂直升降.
f.研磨公差: ±0.05mm.
g.UPH:1.8K
  •CCD 尺寸量測功能:
1.CCD外觀尺寸量測.
2.可設定全部檢查或By pass.
3.量測精度±0.03mm,上下限可自行設定.
廠務需求 Facility Items Requirement  
Machine Model   Model 9435
Power Supply Voltage /Phase /Wire /Hz 220VAC /1∮/ 3W/ 50/60Hz
Capacity 30A
Ground, Ω Normal
Dry Air Supply Usage(NL/min) 1500L/min. (Total)
Pressure >90PSI
(Over 6 kgf/cm2)
(Machine site, Auto Run Model)
Suggest to prepare 2 sets
Size / Fitting 3/4” / PT
Temp ℃ Normal
DI Water Supply Usage(L/min) 5 L/min.
Press kg/cm2G 2~3kg/cm2
Temp ℃ NORMAL
Size / Fitting 1/2"Fitting by Clamper
Air Exhaust Type Air
Static Press(mmAq) 35mmAqX2
Usage(m3/min) 16~18 m3/min.
Size / Fitting Outer Diameter:100mmX2/Fitting by Clamper
Water Exhaust Type Water
Static Press(mmAq) FREE FLOW
Usage(m3/min) 5 L/min.
Size / Fitting Outer Diameter:33.5mmX2/Fitting by Clamper
Machine Dimension WXDXH 2400X1105X2050 (mm)
Machine Weight Kg 900Kg